Might be a firmware update, yeah.

Also, if you want better speed, use 10.3.9, and stay away from 10.2, and 10.4 Click to expand... I only have Mac OS 9.2.2 and 8.6 installed. It's just what I need for now. And…

Good news: I got a hold of ROM 2.5.1, on an installation CD for a G4 system. [] ]'> Bad news: The CD won't boot my G4! [xx(] ]'> According to the system profile…

Blame Apple. Top secret fees, overpriced docs. Apple wanted 895 dollars for the programming manuals for newton. DOCUMENTATION! Microsoft that same time frame gave away cdroms ful…

one of the problems you could be having, is interfearance inside the CPU itself. If you get it too fast, you may be causing electricity to cause interfearance from the heat INSIDE…

What is the maximum voltage for that CPU?

It's not showing up et al? no "DLINK" or anything?

yes i got the at in the menu bar grayed out. i know it is not connected it acts like is is trying to connect and then sayed that it can not connect my dlink does not show up in …

Here's an idea. Settle in at 450mhz and stop pushing it to 500 before you fry it. Bumping a 400mhz chip to 500mhz is a 25% overclock, which is really pushing it with air cooling. Y…

Here's an idea. Settle in at 450mhz and stop pushing it to 500 before you fry it. Bumping a 400mhz chip to 500mhz is a 25% overclock, which is really pushing it with air cooling. Y…

Could PSU be the source of the problems? the computer freezes at 43°C when running at 500mhz.

If it's working you should see this http://farm4.static.flickr.com/3212/2617623548_c853957170_o.png it would be grayed a bit if your not connected to a network.

yes i went in and made sue the airport was selected and even turned off all the security on my dlink router. nothing . how can you tell if the airport card is working?

That's an interesting and rare bit of kit. I think the CF-IDE adapter you reference requires yet another adapter to work. You want to be sure that the IDE interface is specificall…

It'll work a treat, I've tried a couple of very generic looking ones with a Sandisk 1 and 2GB CF card which allow for booting, both on a PB3400 and 5300 (don't use it on that reall…

Please consider that some authors do not want their software to be freely developed after they have abandoned it. It is all fine and dandy to label them as greedy because of that,…

Just so you know, from a message sent to the NewtonTalk mailing list on June 14th: Dear Newton Users, I'm pleased to announced that ATA Support can now be downloaded in a f…

I have a USB2 PCMCIA card that I can use if that particular change is made.

For my Lombard I just pulled 5v from the pads on the bottom of the mobo from the USB ports. They are nice and exposed and it is super easy. I have never used much more than a keybo…

basically worthless Click to expand... [!] !]'> /me hugs Duo collection. No, don't cry my pretties, he didn't mean it

I've heard of some people (like this one) using the +5v from the PCMCIA card cage to run the fan off of a little switch they've installed. May be worth trying, or googling for othe…

Can't say I know the inside of the Lombard too well so I might be well and truly off the mark here but is there any sort of thermal sensor that's tripping (or in this case not trip…

I replaced the fan and it was spinning OK when installed. Heck even the original one looked OK.

Does anyone have or ever use a Koala Pad Touch Tablet? What are your opinions on it? How much do they typically run for these days? Click to expand... Here's an article you mig…

Have you set up the ibook to connect with airport (instead of, say, ethernet or modem)? DHCP selected?