Both built in Singapore, and both boards indicate they were assembled there too. Pina's book lists the part numbers for the 4 chip ROM board only which is odd as it's dated 1993 w…

There were indeed two different Classic II cases, the difference between them being the speaker location. Whether there was a corresponding change in the logic board configuration …

Where did the speakers get relocated to? Click to expand... They didn't. I don't know what he's talking about. I have heard that the CLassic II had two different ROM configs, …

Is the change perhaps associated with when the speaker was moved? That would be easier to pin down to a specific date. Click to expand... In these two, the speakers are located…

Ok i ordered a 8-pin cable male to male. Another question. Is it possible to connect the roland mt-32 to imac g3 with a usb midi cable (for mac 9)?

Is the change perhaps associated with when the speaker was moved? That would be easier to pin down to a specific date.

current status: IBM PC-DOS 2000 + pcmcia + PC card 16 (network everywhere) 100 base T lan + linksys 802.11G to 100 baseT wifi bridge + graphical web browser http://cheesefactory.…

You are certain that this card is compatible with OS 9, and doesn't require special drivers? Click to expand... Not really sure. I started off this question noting …

I use tape all the time for the vintage gear (archives).

After looking through all the topics in this forum, I don't see that this has come up before; my apologies if it has. I have two logic boards, both marked as Classic II and dated …

You are certain that this card is compatible with OS 9, and doesn't require special drivers?

The DB25 connector on the old Macs IS NOT a serial port! It is a SCSI port, and connecting a non-SCSI cable/device could potentially damage the system. The 8-pin round ports are th…

Used and in the school's packaging, for the most part. From the classrooms or the library.

Radius Rocks! I've been using their products since '87 and the one I love most is my 81/110 with the Radius VideoVision Studio Setup. I liked its design so much that I snagged a N…

I tried installing Apple's USB Adapter card support 1.3.5 but it would not go because, i think, my OS is 9.1. Then I installed Apple's USB Adapter card support 1.4.1 . However , n…

Did you ever figure anything out? I have a SE and an EtherWave and have been trying to get my SE on the net.

i bought a cable for connecting the midi interface with the mac. It is a 'Macintosh Modem Cable 3' DB25 M to 8-pin MiniDIN'. It features DB25 male connector with locking screws on …

I like the 81/110 Radius, and I own one. Still the tape drive in the WGS 8150 is nice, but I have externals so backup is not a problem.

The Radius is the greater rarity. WGServers are no different than ordinary Macs of the day, though both (?) machines likely have an extra large L2 cache. If it's 1MB, the chip alo…

I put the new 128MB module into my LC 575 and it registered fine, so I'll post the link if anyone else is interested. It's a darn good price, but there are only three left: http:/…

I have both of these, but only enough parts to max out one of them. The positives I see: Radius has internal fast SCSI and integrated video. WGS 8150 has a tape drive, is a bit …

i was looking around in a local thrift shop today, and i found an apple m0100 mouse. it has the serial type connector, but pin #6 is broken off. for $1 i could not pass it up! i lo…

The following exerpt is from off of the PDF file containing original install instructions, courtesy of Belkin.com: When installing the F5U005-MAC in a PowerPC-based Macintosh® com…

Hmm... That is weird. I have my Sawtooth G4 maxed out with three HDs and it's DVD drive, Everything worked fine. I know yours is a quicksilver, but they're not that far apart. I h…

Finally a look at the tools we should actually have.