Re-Install System 7 on LC III Hard Drive — #11
I burned this ISO under Windows and ImgBurn and it works like a charm... Snow Leopard makes unreadable CDs with this ISO. I tested it with the same CD-Rs.
Found 19,095 posts across 1 forum.
Getting file system access to my duos Hard drive — #2
If you have a dock with a SCSI port, and a PowerBook "SCSI disk adaptor", and a USB-to-SCSI adaptor, then yes.
Just follow the directions on the LEM link, "SCSI Disk Mode" section…
Possible Project?? — #2
Heck yeah, why not? Have a good look at some of the iMac and ATX-cased Mac hacks around the web.
Do you have the original eMac power supply? That will save a lot of hassle.
How to install a usb card in my Performa 6360 ? — #11
There is one particular midi/audio sequencer that Emagic and Roland developed to edit the Roland VS series of hard disk recorder. / The Emagic programme Logic could be used to cont…
G3/500 vs. G4/400 in B&W — #6
In that case, the only other variable is the fact that the G3/500 is a copper one, though I don't remember if that introduced any performance enhancements, per se.
Based on what I…
Getting file system access to my duos Hard drive — #1
I have a duo 210 that won't boot, and I seem to have lost the floppy drive for it. I want to get access to it so I can fix my finder and system files (played around with them in re…
Language switching? — #1
Hi!
I'm pretty much new to the Newton world, since my latest conquest involved a MP 120 and a MP 2000 upgraded to 2100. Those are my first Newton.
The 120 is in german. I don't h…
Some really good goodies! — #1
Great week in conquests for yours truly:
- two Newton: a MP 120 and a MP 2000 upgraded to 2100. Both work perfectly! The 120 lacks its stylus and is in German. I live in Switzerla…
Issues with IIvx and Performa 600. — #3
Yeah, that was my thought at first, but there aren't any caps right near where the apparent leakage is. And the closest one looks just fine.
Also, I would have thought that leaky…
G3/500 vs. G4/400 in B&W — #5
I went ahead and downloaded the XLR8 firmware block remover. I assume it also works for non-XLR8 G4's.
The G3/500 is a Buffalo (Melco) HG3-G3500 with 1mb cache running at 250mhz…
G3/500 vs. G4/400 in B&W — #4
I went ahead and downloaded the XLR8 firmware block remover. I assume it also works for non-XLR8 G4's.
The G3/500 is a Buffalo (Melco) HG3-G3500 with 1mb cache running at 250mh…
G3/500 vs. G4/400 in B&W — #3
Most of the "legit" Apple G3 modules have 1MB of L2 cache, which depending on the configuration of the /350 or /400 G4 chip, may actually cause the G3 to blow the G4 away in those …
Apple MIDI Interface — #4
I have an older MIDI enabled keyboard + I was thinking of getting a newer 1 or 2 octave controller. Most of those are USB but I think there are a couple that have raw MIDI as well.
Issues with IIvx and Performa 600. — #2
I'd say it could be the caps, they seem to be reaching EOL on a lot of machines of this era (I have 2 LCII boards and 1 LC475 board, all from 1993 vintage machines that need recapp…
Apple MIDI Interface — #3
I have a third party MIDI interface...neat to have, but ultimately useless unless you're planning to connect musical instruments to your Mac.
Issues with IIvx and Performa 600. — #1
So I'm starting to go through my collection to decide what to keep, and what to dump, er, pawn off, er, offer to the MLA members...
The first two are a IIvx (that I have never eve…
G3/500 vs. G4/400 in B&W — #2
I have a G4/400-ed B&W, which was a straight swap over from a 400Mhz G3 module. Since the only thing that changed in the swap was the module I suppose that's as good as exp…
G3/500 vs. G4/400 in B&W — #1
Looking for some advice...
I have a B&W G3. It originally a 400mhz system, but a few weeks ago, I upgraded it to a G3/500 with a cheap ZIF from IC-China. It is currently r…
Apple MIDI Interface — #2
Any suggestions for MIDI software for older macs?
Click to expand...
Performer or Digital Performer is by far the best, IMO. Performer handles MIDI only, while Digital Performe…
Apple MIDI Interface — #1
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120504889362&ssPageName=ADME:X:AAQ:US:1123
I'm not really sure what to do with this, but I had never seen or hea…
How to install a usb card in my Performa 6360 ? — #10
That card should work fine. Just keep in mind that no matter what card you buy, Mac OS 9 only supports USB 1.1 (12Mbps) and not USB 2.0 (480Mbps).
How to install a usb card in my Performa 6360 ? — #9
This is the card i bought today
http://www.amazon.com/Belkin-F5U005-MAC-Pci-0-2-USB/dp/B00004Z6M5
please don't say "what a mistake" you made.
Hooper Parts Source? — #5
We've got similar mac collecting tastes, I see...I have 6 PB 1400s, 2 5300s, one Pismo 400/40/512k, 2 old PB 150s, a Classic II, the on life support 3400...and several PCs too, ala…
How to install a usb card in my Performa 6360 ? — #8
You will need the 2xPCI riser card that was stock with these machines. . .
Click to expand...
6360 is a one slot riser limited rev of the Quadra 630 line. Other than that sin…
How to install a usb card in my Performa 6360 ? — #7
Just be aware that even if you install a USB 2.0 card, under Mac OS 9 it will still only perform at USB 1.1 speed (12 Mbps), since OS 9 does not support USB 2.0, and unfortunately,…