Thank you all for the friendly and helpful information/advice. i use my p6360 to run some "old" midi audio sequencer programmes that when they were ported to OS X some of them die…

Vine Server (formerly OSXvnc) is nice in that it allows multiple VNC sessions to be open simultaneously. Use Fast User Switching, and launch Vine Server in each user. Each user h…

It looks like it will be a bit longer before I clean the board. I thought about going in to work to do it today but it looks like we're in a blizzard now here on the US east coast…

http://freewebcontents.blogspot.com/2009/11/keyboard-mouse-freezes-on-ubuntu-910.html

I should probably get a USB card for one of my Performa 6360's (I have 3).

You will need the 2xPCI riser card that was stock with these machines. . . Click to expand... 6360 is a one slot riser limited rev of the Quadra 630 line. Other than that sin…

The logic board pulls out like a drawer. You will need the 2xPCI riser card that was stock with these machines, but apart from that, the required extensions should be in the stock …

Install the card as you would any other PCI card, and make sure that all the Apple USB extensions are installed. Here is a link to download v1.4.1 of Apple USB Adapter Card Support…

Advice/instructions/how to pictures ? The Performa 6360 is running OS 9.1: do I have to reinstall the OS after the card is installed ?

Because I had my first experience with remote transmission about twenty years ago, using a modem to connect to simple mailboxes, I value the bandwidth (as anyone of us appreciates …

I really enjoyed reading your post about the reasons that you settled on buying a IIci. Back in the day, I felt that the IIci was the pick of the Mac product line. It was way out…

I have a dead 500mhz Sawtooth. It has been sitting for awhile down in the basement. It quit one day , after a few attempts to revive it, it went to the basement. A motherboard f…

I have a 22" 1680x1050 LCD monitor hooked up to my B&W G3 that has been chugging along fine at that resolution for quite a while now. All of a sudden, after a fresh reboot …

We've got similar mac collecting tastes, I see...I have 6 PB 1400s, 2 5300s, one Pismo 400/40/512k, 2 old PB 150s, a Classic II, the on life support 3400...and several PCs too, ala…

Not particularly serious. The bus speed is the same, so no fiddling with SMT resistors/jumpers. From memory, the VRM coil has to be bent out of the way, and an adapter plate made…

Well, that got my attention. Can a dual G54/500MHz processor go in a Cube without serious surgery?

Interesting...pooh, I hope it's not the VRAM but we shall see. If it's a dead duck, I'll repost...get the parts somewhere useful. I expect this is a 180mhz. because it's only comi…

Yes, it was AU$5 +pp. I'll get around to uploading them sometime soon

PowerBook 100 Series Service Training Video (to add to the 200 and 500 series for uploading) Click to expand... It seems luck is on Macintosh liberation's side; hopefully you p…

I have a PB 3400c with the same issue. The screen generally will not light up but when it does, the screen is all messed, then the unit crashes. The cable and everything in the …

I'm can't find it on the apple site, but it seems it would be considered something like "abandonware" since the Newton era is gone and over with... But since I'm no expert on what…

Try these: http://www.jellico.com/fwoodward/ http://www.jagshouse.com/GetYourCompactMacOnTheWeb.html http://support.apple.com/kb/TA29160?viewlocale=en_US

Below is the last few weeks of scores from evilbay. In addition to these, when I went to pick up some of the items from a local seller, I also bought the following: Quadra 700, m…

I don't know if this is allowed here but anyways I'm getting ready to put my new 2100 to use however I seme to have misplaced the Mac installer for the Newton Connection Utility. I…

I'm getting a Hooper (PB 3400c) in a couple of days - decided to try my hand at restoring one, since I've done a lot of work on 5300's. The one I bought (for $2 plus shipping) has …