Found 16,637 posts across 1 forum.
Remove Cigarette Smoke Smell — #4
http://www.cvs.com/shop/health-medicine/first-aid/antibiotic-antiseptic/cvs-isopropyl-91-alcohol-first-aid-antiseptic-spray-skuid-958283
{
"lightbox_close": "Close",
"…
Remove Cigarette Smoke Smell — #3
Well, I do think the Retr0brite is a good idea for the case. Are you going to recap the board or send them off? If you're doing it, wash the logic board at least.
I've never had s…
Remove Cigarette Smoke Smell — #2
the only thing that cuts through that nasty is 91% IPA.
Remove Cigarette Smoke Smell — #1
I've recently relocated my Color Classic from my mom's house, where it's lived happily since 1993 choking on cigarette smoke.
I think it is going to need a recapping, and the 160m…
Interesting IIc Find — #2
The word on the vine was that Rocketchip had a few bugs. though I've personally never encountered them.
Interesting IIc Find — #1
Just opened up both my IIc's thinking that I would have a 256K RAM Upgrade in one of them. The cleaner (and older) of the two (little case yellowing on it) was just a plain 128K II…
68k Mac's, onboard video, and LCD displays? — #8
I have found the IICI especially fussy, it as well as the IICX, IISI, IIVI, & IIVX use "Sync on Green." I believe declaring a 13/14" RGB monitor is what worked for me...
Apple II Motherboard ID — #5
Here is my motherboard in my Apple II, I wasn't able to find the part number, maybe its under the keyboard part. My board has different slots, they have a little flange at the end …
macintosh II not starting up or displaying — #13
Yes, you can swap that over no prob. I forget if I did, but I may have done the same from a IIx. With my 030 upgrade, it really did not matter in the end since I had to pull the ch…
macintosh II not starting up or displaying — #12
@ unity, ok i took the board out and counted it, i have the 132 pins or a 13x13 row setup. I doubled checked and they are soldered through. One thing though, if this originally i…
Mac OS 7.6 on PowerBook 1400cs/166? — #13
The Clamshell might work if it is the same size. The G3 iBook wont work because the plug is too small.
Mac OS 7.6 on PowerBook 1400cs/166? — #12
If the plug fits it will work.
Mac OS 7.6 on PowerBook 1400cs/166? — #11
Can I use the replacement power brick for my Dual USB "Snow" iBook G3 (700MHz I think, from GainSaver) for the PowerBook, or must I buy a replacement 1400c(s) power supply from eBa…
Mac OS 7.6 on PowerBook 1400cs/166? — #10
Some brands of media were crap also. Lots of burn errors on generic and the like. Slower write speeds helped.
Mac OS 7.6 on PowerBook 1400cs/166? — #9
I have the Apple 600i CD reader and 2 CD Burners (one from Ricoh and the other from who knows...) all can read 700mb media and the burners can burn 700MB. It's just that last coupl…
SE30 thinks there is an external drive attached — #23
I gave up and gave the board to a friend who has professional equipment for removing things like chips.
The right equipment does a nice job without the damage I would do.
SE30 thinks there is an external drive attached — #22
was it tough getting that old filter out buddy?
SE30 thinks there is an external drive attached — #21
Couldn't have done it without your help!
SE30 thinks there is an external drive attached — #20
cool u da man!!!
Mac OS 7.6 on PowerBook 1400cs/166? — #8
Hmm... I'll have to see what it says on the door when I get it. I don't mind using CD-Rs for now. It would be nice to have CD-RW capability though. Edit: In the eBay picture, the C…
SE30 thinks there is an external drive attached — #19
BMOW, I don't recall if it happened when I booted from the floppy. It did happen when booted from an external drive though.
SE30 thinks there is an external drive attached — #18
Sorry Indidnt take a photo, but Rlfen described it correctly. I can't take a photo now, because the problem has been fixed.
Thanks to C and uniserver, Bourne filters have been rep…
PowerMac G3 All-in-One, iMac G3 - Same Symptoms — #11
put it in a room with Air conditioning, or a dehumidifier.