I don't have a clue how or where to get vacuum formed plexiglas over a form. Can you elaborate a bit? Is this a home/garage project? Necessary equipment? Or are you paying a…

SCSI-2 to SCSI-1 conversion boards are cheap and easy to find. If they do a price break on small quantities (say 10) maybe we should RaQ for a group purchase

abandonware, it should be perfectly legal for you all to snag copies. Click to expand... Yyyyyeah... that's not exactly true, but who cares. Image away.

This seems too easy. Am I missing something? Click to expand... Assuming you're putting in a VGA/SVGA capable motherboard, nope. And that's a darn good price for a monitor wi…

Trag, search the forum for CC mods. This has been covered a lot. There are some pretty sophisticated ones. I have not heard about vacuum formed Plexi either, but you do not need it…

Unfortunately the rear bucket case from the SE has more of a tilt at the front where it meets the bezel Click to expand... Actually it's the Plus that has the tilt back. The SE…

I formatted the a floppy as a 1.44 MB FAT disk Click to expand... I don't believe you will be able to use a FAT formatted floppy as a boot disk. It must be formatted HFS.

I'm not worried about getting a discount on a $3 part. Mine arrived yesterday, I hope to find some time to do the repair and test the board some time this week. I bought a couple…

Sell the extras (for a reasonable price, of course), and you will make back your shipping and could be a benefit some users here (some of whom live outside the United States). But…

clear plexi, vacuum formed over the original CRT face Click to expand... I don't have a clue how or where to get vacuum formed plexiglas over a form. Can you elaborate a bit?…

Can you re-cap a Classic II board? Click to expand... If you can, could you inquire to the forum's vast experts as to which caps I need to do for an effective repair, instead…

My Arduino board arrived so I can start experimenting with the Microcontroller. I also share the concern that the memory is too small, but well just have to see what happens. My n…

If you are going to emulate the 400K drive itself, it is completely dumb. The IWM in a first generation Mac is exactly the same as the IWM in an Apple //c or an Apple II non-integ…

If I can find one more vintage Mac, I'm gonna force my friends into a Bolo LAN party. :rambo: Click to expand... Nice one. Click to expand... Yep, I remember being excited…

Actually, got 3 copies of the manuals. Also was given a bunch o books on it, and just a ton of goodies! Click to expand... How fortunate for you. Make sure to read the manuals…

You can also patch Drive Setup, which is better than HD SC Setup, IMO. It's not very hard to do.

I tried converting everything over and booted the SE up in the Plus case. Amazing how many of these Apple parts are just interchangeable bolt-ons, no modification required. Unfort…

http://www.tri-m.com/products/sandisk/ffd35unscsi.html That web page says they will even supply a SCSI-1 interface upon request. Since it's an EOL drive (and hence, they probably …

Thanks JRL. The only difference I encountered with those instructions is as follows: 1. Wen I de-compress the Network Access archive using StuffIt Expander (per your original inst…

The best SSD for the SE/30 is a drive that is made in the stock form factor (3.5") and already has a 50-pin SCSI connector. Indeed, one probably couldn't do much better than this:…

Just a thought....you could paint it black, and use a matching black keyboard and mouse, and maybe go all-out with an OS skin, to make it look something like the TEMPEST SE in the …

If you don't mind risking such a machine...your best bet would be a Mac II. Otherwise, you could gut an external Apple 3.5" drive for the adaptor board and connect it to an IWM-equ…

Just a thought....you could paint it black, and use a matching black keyboard and mouse, and maybe go all-out with an OS skin, to make it look something like the TEMPEST SE in the …

It'd be handy to know a bit more about your Netatalk setup (maybe post relevant parts of the config files: atalkd.conf and AppleVolumes,default would be good). Did you re-compile…

You mean an Apple IIe? Either way, nice score...especially for the price! One thing about the Apple II series machines...if you don't have a monitor, you should be able to use …