Is the RAM installed the right configuration - and have you done a CUDA reset (just press the button for a second)

Thanks for the tip ScutBoy! I just had to turn the middle one a little bit and the image is stable! See the video: http://youtu.be/8zKdirmhL4c

Odd. So basically you have to machines on two displays that do not work - if I am distilling this right. I mean you tried to displays, two main boards, two video cards. Right? And…

Is the cable good? No bent pins?

Can't even get to the point of being able to boot unfortunately... It powers up the screen just after the startup chime without displaying anything then just drops it back to power…

You try reinstalling the OS, or swapping with a drive with a known-good OS?

So, my latest conquest has still not successfully run under it's own steam yet and I am beat as to why. It will chime, and will power up the monitor (I have tried both my old Phil…

On a regular Lisa, I'd remove the top, and there are 4-5 pots along the top of the analog circuit board that adjust horizontal and vertical hold, screen height and width, etc. The…

The issue is the processor upgrade. You need an older cpu to do the install, then install software (usually an init and a control panel) for the processor and then you will be goo…

Hello guys, this is my first post in this community, who already helped me a lot with some nice thread I followed in the past. I'm italian so forgive me for my english, not so sur…

Still no joy. Found the startup sequence in the TIL. Vis ----- Step 5: System File Is Found and Opens When a valid System file is located, the System file, and any ROM updates are…

Recently bought a powerbook 100 from an acquaintance. He threw the battery away because it was starting to leak. I don't really want another battery, but I'd like to get a shell o…

For our mobile (iPhone, iPad, etc) user the video in the post. Won't be visible on normal web browser. http://www.youtube.com/watch?v=rvsUVku9fFU

  Today I used my newly acquired Lisa XL with Macintosh motherboard to test my other incomplete Lisa XL I switched motherboard and PSU and tested. And yes.... it worked!! Not very …

I'm not sure if the space between the two nubs needs to be clear... so a full axle might not work.  a nice tight-fitting bit of metal (perhaps as simple as a bit of clothes hanger …

Could do a rod, or drill out the one side and glue a rod into it.

The different angles of door is something I have not been thinking about much. Your argument makes lot of senses... But how do you suggest I proceed to repair that little pin that…

meall said: I have an external III floppy that I could "destroy" to repair the main unit, but I'm looking at a better/cleaner solution. Click to expand... You'll need to …

Bunsen said: What size is your SATA drive?  There's a limit of ~128GB on the older Macs. Click to expand... I've tried 32 GB & 64 GB drives so far, either whole o…

What size is your SATA drive?  There's a limit of ~128GB on the older Macs.

I couldn't get a ZIF PATA - mSATA adapter to work on my MBA.

So you probably want an ATA-6 drive unless someone can correct me there. I had a similar problem.

Trying to figure out ATA compatabilities A drive out of the 3400c is a 2 GB Travelstar DCRA-22160. The specs say it is ATA2 Fast/Enhanced with an external data transfer rate = 16.…

I'm glad you sorted that out. I hope now things will be easy for you when you replace the floppy drive. You should be able to replace the drive guts with another working one like a…

Great news. Like Byrd said, its a compatibility issue. Have you tried it on an older machine like a 1400?