The wheel turns ever slow, and yet it doth turn... I'm typing this on the Lombard right now. It's got OS X 10.2.8, 512MB of RAM, the original 333 CPU and logic, a new 80GB 5400rp…

I'd go with a firmware update. Its unlikely that OS X would have anything to do with it - despite the fact that I primarily run my iMac under Mac OS X, it will quite happily boot o…

Sonnet works (for instance, the 500 MHz Encore) from 8.1 to 10.4 with XPostFacto. Click to expand... But this is for the beige, right?

question: what OS are you running? what about you d-link? is it set to work with 802.11b? or is is a/g only? A lot of times, a poorly configured router can cause it not to be p…

Sonnet works (for instance, the 500 MHz Encore) from 8.1 to 10.4 with XPostFacto.

Before you give up, check the simple things: Is the card securely seated? Is the antenna connector actually plugged into the card? I've run into several cases where the connector w…

that is correct nothing at all this sucks the card must be bad

You might be able to instal directly in Open Firmware.

I don't know. Maybe some game would conflict with it's drivers, which will also slow the whole system down. I heard that it would also restric mac os versions I can use. I need ful…

If I took a faster processor, it would have to be from 3rd party manufacturers, which I don't like very much and could lead me to incompatibility problems. Click to expand... W…

Might be a firmware update, yeah.

Also, if you want better speed, use 10.3.9, and stay away from 10.2, and 10.4 Click to expand... I only have Mac OS 9.2.2 and 8.6 installed. It's just what I need for now. And…

Good news: I got a hold of ROM 2.5.1, on an installation CD for a G4 system. [] ]'> Bad news: The CD won't boot my G4! [xx(] ]'> According to the system profile…

Blame Apple. Top secret fees, overpriced docs. Apple wanted 895 dollars for the programming manuals for newton. DOCUMENTATION! Microsoft that same time frame gave away cdroms ful…

one of the problems you could be having, is interfearance inside the CPU itself. If you get it too fast, you may be causing electricity to cause interfearance from the heat INSIDE…

What is the maximum voltage for that CPU?

It's not showing up et al? no "DLINK" or anything?

yes i got the at in the menu bar grayed out. i know it is not connected it acts like is is trying to connect and then sayed that it can not connect my dlink does not show up in …

Here's an idea. Settle in at 450mhz and stop pushing it to 500 before you fry it. Bumping a 400mhz chip to 500mhz is a 25% overclock, which is really pushing it with air cooling. Y…

Here's an idea. Settle in at 450mhz and stop pushing it to 500 before you fry it. Bumping a 400mhz chip to 500mhz is a 25% overclock, which is really pushing it with air cooling. Y…

Could PSU be the source of the problems? the computer freezes at 43°C when running at 500mhz.

If it's working you should see this http://farm4.static.flickr.com/3212/2617623548_c853957170_o.png it would be grayed a bit if your not connected to a network.

yes i went in and made sue the airport was selected and even turned off all the security on my dlink router. nothing . how can you tell if the airport card is working?

That's an interesting and rare bit of kit. I think the CF-IDE adapter you reference requires yet another adapter to work. You want to be sure that the IDE interface is specificall…

It'll work a treat, I've tried a couple of very generic looking ones with a Sandisk 1 and 2GB CF card which allow for booting, both on a PB3400 and 5300 (don't use it on that reall…