Thank you

There are 3 install discs that were issued by apple to DTK owners: Mac OS X 10.4.1 8B1025 Mac OS X 10.4.1 8B1099 Mac OS X 10.4.3 8F1111 All of these have been patched in variou…

The BIOS is a custom one based on the intel reference bios for this board series. It pre-dates the "retail" board used in the D915GXX series by a little bit (no surprise there as t…

I decided to take a few resistance measures between the pads of the capacitors in the battery area of the logic board.  Among the top 6 capacitors, the two on the left and the two …

Cool!

No but the battery area looked like yours so just to be safe it was worth it while apart to do it.

Macdrone, what was wrong with your board? Was it exhibiting similar problems?

When I did mine taking them all off and putting in 1 by 1 worked well for me. And I did that with a radio shack special 3 years ago , I'm pretty sure that makes me crazy also lol.

Had time to look at this boy more closely today. I've washed the board completely over again, and now it's really shiny clean - unfortunately no luck with the problem. So I've de…

I try this this week Today, i have connected a VGA header (with haplain help) and it works : i have connected two display 

raoulduke.... What I love about building your own battery replacements is that the older the device, the higher mAh your new one will be. I just found a PRAM replacement battery …

Pull out the PSU and inspect the Q950 board. Make sure there are no burnt traces on the board. It has onboard Video to connect to a monitor. The Nuvista card was for video process…

smiba said: I've put the project on hold for a while until I have some more time for it. So sorry, Can't help you further. The iMac G3 should have an intergrated ethernet po…

All three PowerBooks (PB 3400c + PB G3 "Kanga" + PB 3400c) are booting to desktop, the left one still with faulty keyboard connectors.

Here some more pictures which I shot, when the PB 3400c battery fell down. - Yes the battery is still ok.  (dimensions in centimeters)

Schmoburger said: This page is as good on my souped-up G3-powered 9600 as it is on my G5 so I doubt you will have any dramas on the iMac TC is a bit boggy in Classilla but…

smiba said: Would you have any copy of the OpenTransport disk by any chance? Click to expand... I do have a copy, but I only have my CC, and I can not figure out how to s…

System7today has it I think. 

Would you have any copy of the OpenTransport disk by any chance?

After installing the software for my ethernet card (Farallon), I could not get my internet to work until I installed Open Transport.  Then it was a cake walk.  I was using OS7, an…

I've put the project on hold for a while until I have some more time for it. So sorry, Can't help you further. The iMac G3 should have an intergrated ethernet port though, any rea…

Hi, Did you get this working? I have a Dayna pocket SCSI/Ethernet box Im trying to use to connect a Classic to an old iMac G3 - the candy coloured ones.

Thank you, that was very helpful.

These are the pinouts:

Good luck! I doubt to be successfull with mine, as the leaking PRAM battery was above the keyboard connectors and video part. The worst place ever!