Search titles, bodies, and author names
Found 57,575 posts across 1 forum.

Some really good goodies! — #2

Now, the next challenge is to free some time to play with my collection. I haven't touched it in weeks… :-/ Click to expand... What about Christmas time (etc.. right now!!! …
68kMLA Peripherals by agg23 Mon, 21 Dec 2009 - 01:19

Re-Install System 7 on LC III Hard Drive — #11

I burned this ISO under Windows and ImgBurn and it works like a charm... Snow Leopard makes unreadable CDs with this ISO. I tested it with the same CD-Rs.
68kMLA 68k by moksienciuk Sun, 20 Dec 2009 - 22:27

Getting file system access to my duos Hard drive — #2

If you have a dock with a SCSI port, and a PowerBook "SCSI disk adaptor", and a USB-to-SCSI adaptor, then yes. Just follow the directions on the LEM link, "SCSI Disk Mode" section…
68kMLA Peripherals by Anonymous Freak Sun, 20 Dec 2009 - 20:38

Possible Project?? — #2

Heck yeah, why not? Have a good look at some of the iMac and ATX-cased Mac hacks around the web. Do you have the original eMac power supply? That will save a lot of hassle.
68kMLA Hardware by Bunsen Sun, 20 Dec 2009 - 20:28

How to install a usb card in my Performa 6360 ? — #11

There is one particular midi/audio sequencer that Emagic and Roland developed to edit the Roland VS series of hard disk recorder. / The Emagic programme Logic could be used to cont…
68kMLA Software by Bunsen Sun, 20 Dec 2009 - 20:23

G3/500 vs. G4/400 in B&W — #6

In that case, the only other variable is the fact that the G3/500 is a copper one, though I don't remember if that introduced any performance enhancements, per se. Based on what I…
68kMLA Hardware by jruschme Sun, 20 Dec 2009 - 19:59

Issues with IIvx and Performa 600. — #3

Yeah, that was my thought at first, but there aren't any caps right near where the apparent leakage is. And the closest one looks just fine. Also, I would have thought that leaky…
68kMLA Hardware by Anonymous Freak Sun, 20 Dec 2009 - 17:28

G3/500 vs. G4/400 in B&W — #5

I went ahead and downloaded the XLR8 firmware block remover. I assume it also works for non-XLR8 G4's. The G3/500 is a Buffalo (Melco) HG3-G3500 with 1mb cache running at 250mhz…
68kMLA Hardware by Gorgonops Sun, 20 Dec 2009 - 17:27

G3/500 vs. G4/400 in B&W — #4

I went ahead and downloaded the XLR8 firmware block remover. I assume it also works for non-XLR8 G4's. The G3/500 is a Buffalo (Melco) HG3-G3500 with 1mb cache running at 250mh…
68kMLA Hardware by jruschme Sun, 20 Dec 2009 - 16:10

G3/500 vs. G4/400 in B&W — #3

Most of the "legit" Apple G3 modules have 1MB of L2 cache, which depending on the configuration of the /350 or /400 G4 chip, may actually cause the G3 to blow the G4 away in those …
68kMLA Hardware by Cory5412 Sun, 20 Dec 2009 - 14:50

Apple MIDI Interface — #4

I have an older MIDI enabled keyboard + I was thinking of getting a newer 1 or 2 octave controller. Most of those are USB but I think there are a couple that have raw MIDI as well.
68kMLA Software by sambapati87 Sun, 20 Dec 2009 - 14:23

Issues with IIvx and Performa 600. — #2

I'd say it could be the caps, they seem to be reaching EOL on a lot of machines of this era (I have 2 LCII boards and 1 LC475 board, all from 1993 vintage machines that need recapp…
68kMLA Hardware by LCGuy Sun, 20 Dec 2009 - 13:50

Apple MIDI Interface — #3

I have a third party MIDI interface...neat to have, but ultimately useless unless you're planning to connect musical instruments to your Mac.
68kMLA Software by LCGuy Sun, 20 Dec 2009 - 09:15

G3/500 vs. G4/400 in B&W — #2

I have a G4/400-ed B&W, which was a straight swap over from a 400Mhz G3 module. Since the only thing that changed in the swap was the module I suppose that's as good as exp…
68kMLA Hardware by Gorgonops Sun, 20 Dec 2009 - 03:41

Apple MIDI Interface — #2

Any suggestions for MIDI software for older macs? Click to expand... Performer or Digital Performer is by far the best, IMO. Performer handles MIDI only, while Digital Performe…
68kMLA Software by Gil Sun, 20 Dec 2009 - 02:19

Hooper Parts Source? — #5

We've got similar mac collecting tastes, I see...I have 6 PB 1400s, 2 5300s, one Pismo 400/40/512k, 2 old PB 150s, a Classic II, the on life support 3400...and several PCs too, ala…
68kMLA Hardware by Strimkind Sat, 19 Dec 2009 - 23:54

How to install a usb card in my Performa 6360 ? — #8

You will need the 2xPCI riser card that was stock with these machines. . . Click to expand... 6360 is a one slot riser limited rev of the Quadra 630 line. Other than that sin…
68kMLA Software by beachycove Sat, 19 Dec 2009 - 22:02

How to install a usb card in my Performa 6360 ? — #7

Just be aware that even if you install a USB 2.0 card, under Mac OS 9 it will still only perform at USB 1.1 speed (12 Mbps), since OS 9 does not support USB 2.0, and unfortunately,…
68kMLA Software by LCGuy Sat, 19 Dec 2009 - 21:33

How to install a usb card in my Performa 6360 ? — #6

Thank you all for the friendly and helpful information/advice. i use my p6360 to run some "old" midi audio sequencer programmes that when they were ported to OS X some of them die…
68kMLA Software by macguy Sat, 19 Dec 2009 - 20:52

Use an eMac running Tiger via VNC — #23

Vine Server (formerly OSXvnc) is nice in that it allows multiple VNC sessions to be open simultaneously. Use Fast User Switching, and launch Vine Server in each user. Each user h…
68kMLA Software by Anonymous Freak Sat, 19 Dec 2009 - 20:10

IIci - Bringing back my 1st Mac — #13

It looks like it will be a bit longer before I clean the board. I thought about going in to work to do it today but it looks like we're in a blizzard now here on the US east coast…
68kMLA Hardware by IIciNov90 Sat, 19 Dec 2009 - 19:48

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.