max1zzz said:
it could also be the 74ls244's all the ram is connected to, When i assembled and installed a MacGusto II upgrade board onto one of my 512k boards i got somethin…
68kMLATroubleshootingby gooddiTue, 5 May 2015 - 00:57
Thank you for this update. So this was a formally Lisa! Nice to know!
Could you tell me two things:
-Is it normal to find a sticker on such a Lisa that indicates that it is a Mac…
1st of all you don't have a Macintosh XL (AKA a Lisa2/10), you have an original Lisa ( Lisa 1 or converted Lisa 2). The two 26 pin ribbon cables are for the upper and lower twiggy…
it could also be the 74ls244's all the ram is connected to, When i assembled and installed a MacGusto II upgrade board onto one of my 512k boards i got something similar and the in…
68kMLATroubleshootingby max1zzzMon, 4 May 2015 - 19:44
uniserver said:
yes all of the ram is bad… its all no good.… you can screw around and replace one or 2… only 6 months later to have another one or two go bad...
that ram is…
68kMLATroubleshootingby gooddiMon, 4 May 2015 - 18:13
McD replaced my ram and it changed nothing then changed it back since it was the apple branded ram for me, which as a 128 is kinda cool for me. I have 2 working 128's but both upg…
68kMLATroubleshootingby MacdroneMon, 4 May 2015 - 18:09
yes all of the ram is bad… its all no good.… you can screw around and replace one or 2… only 6 months later to have another one or two go bad...
that ram is is the worst. the ap…
68kMLATroubleshootingby uniserverMon, 4 May 2015 - 17:54
Too bad you "HAD" that 5300, Bibilit. Not only is there problems with the power connection on the 190/5300 but sometimes when the battery leaks, the PSU Area (under the trackpad) i…
I looked at your pics (it did not load the first time I posted but that is on my end).
Sad news. Looking at the bottom board, I saw several of the solder joints from the capacitor…
68kMLATroubleshootingby ElfenMon, 4 May 2015 - 17:32
Elfen said:
The "006c" is the chip location, so changes are its F11 + the one next to it.
A"4264" is a 4164 DRAM Chip. Back then they were sensitive to static and heat (comp…
68kMLATroubleshootingby gooddiMon, 4 May 2015 - 17:09
The "006c" is the chip location, so changes are its F11 + the one next to it.
A"4264" is a 4164 DRAM Chip. Back then they were sensitive to static and heat (compared to today's ch…
68kMLATroubleshootingby ElfenMon, 4 May 2015 - 17:01
uniserver said:
video artifacts and sadmac code is all bad ram. who swapped your ram chips for no charge grandpa?
Click to expand...
all bad ram?? you mean i have to r…
68kMLATroubleshootingby gooddiMon, 4 May 2015 - 16:58
unity said:
RAM failure, location F-11.
Or a trap error depending on the site one reads I guess... lol
Are you trying to boot from a floppy? You dont say you do.
Click t…
68kMLATroubleshootingby gooddiMon, 4 May 2015 - 16:52
i found some trace on the back side of board.
that looks like someone had tryed to resoldering or replace ram.
but every ram has thext "4264" with apple mark.
so i thought someo…
68kMLATroubleshootingby gooddiMon, 4 May 2015 - 16:40
You're missing the Widget's power harness. That three pin power cable is for a Twiggy floppy drive and indicates that your Lisa did not start out originally as a Lisa 2/10 or an XL…
Even if the motherboard is busted in the XPS there is still really nice components inside. I'm surprised the owner didn't salvage the really nice parts on the inside.
68kMLAPowerPCby SuperToasterMon, 4 May 2015 - 16:11
Just FYI my ram was swapped with new chips and no change. If you have video artifacts with the error code another chip may be at fault. I have yet to figure it out. Now that I a…
68kMLATroubleshootingby MacdroneMon, 4 May 2015 - 15:12
@bibilit , you know where to find these kind of recycle haul here in france
Click to expand...
Not really, from time to time car boot sales or flea markets have been good to me (…