Yes

That last vid you posted, where you typed the URL, just looks like a link to me. Unlike the others. That shield looks like internet security settings. The lock just means secure si…

why wont this work for me - none of my vids show correctly - the vid was just uploaded on my page..youtube..........look for 'fenorcity'............its the last vid (just uploa…

it wont work.even if I type the dam link. - help me out here people -

I figured it out:

Thank you for your reply. So, I'll try to use the old original 603 ev processor card I got in the 8600, boot the system, then load the software of Maxpowr G3 an then re install th…

Go slowly. Install some known working RAM. Remove all PCI cards other than video. Reset CUDA. Go for a walk and make a cup of tea. And clean the plugs on the PSU, test them for…

Solved my own problem... I have a USB Edimax EW-7811UN wireless adaptor. While looking on the website, I found that they had Tiger drivers. I installed that and am now happily (th…

Nice! Glad it helped!

Is the RAM installed the right configuration - and have you done a CUDA reset (just press the button for a second)

Thanks for the tip ScutBoy! I just had to turn the middle one a little bit and the image is stable! See the video: http://youtu.be/8zKdirmhL4c

Odd. So basically you have to machines on two displays that do not work - if I am distilling this right. I mean you tried to displays, two main boards, two video cards. Right? And…

Is the cable good? No bent pins?

Can't even get to the point of being able to boot unfortunately... It powers up the screen just after the startup chime without displaying anything then just drops it back to power…

You try reinstalling the OS, or swapping with a drive with a known-good OS?

On a regular Lisa, I'd remove the top, and there are 4-5 pots along the top of the analog circuit board that adjust horizontal and vertical hold, screen height and width, etc. The…

The issue is the processor upgrade. You need an older cpu to do the install, then install software (usually an init and a control panel) for the processor and then you will be goo…

Still no joy. Found the startup sequence in the TIL. Vis ----- Step 5: System File Is Found and Opens When a valid System file is located, the System file, and any ROM updates are…

For our mobile (iPhone, iPad, etc) user the video in the post. Won't be visible on normal web browser. http://www.youtube.com/watch?v=rvsUVku9fFU

I'm not sure if the space between the two nubs needs to be clear... so a full axle might not work.  a nice tight-fitting bit of metal (perhaps as simple as a bit of clothes hanger …

Could do a rod, or drill out the one side and glue a rod into it.

The different angles of door is something I have not been thinking about much. Your argument makes lot of senses... But how do you suggest I proceed to repair that little pin that…

meall said: I have an external III floppy that I could "destroy" to repair the main unit, but I'm looking at a better/cleaner solution. Click to expand... You'll need to …

Bunsen said: What size is your SATA drive?  There's a limit of ~128GB on the older Macs. Click to expand... I've tried 32 GB & 64 GB drives so far, either whole o…

What size is your SATA drive?  There's a limit of ~128GB on the older Macs.