40 or 50 MHz chips will work but run at 33 MHz.

It will only run at the clock speed the motherboard is set to. 33 MHz is all you can get.

Hi folks.... I just bought a MC68882FN33A FPU for my Color Classic II logic board.  I think the "33" at the end of the Motorola model number means that it runs at 33Mhz. (?) Afte…

hi genie - good to hear ya - I basically buy nothing from Ireland based on principle......irish retailers charge 3 times the price for everything...............for no reason but gr…

Is there no Maplin's near you? Pain having to go through mail-order for those small bits and pieces. Did you try http://ie.rs-online.com/web/ ? Next day delivery, based in Dublin. …

heres the vid of the sub woffer tear down, fuse, and bang. the bang is at 17:20

It would not print the right colour, it would be pure white.  But if I were to buy a drive cover off of eBay, for example, it would be a different colour anyway, since my case is s…

will do - ordered 2 new 470uf caps and 10 x 6.3 amp fuses........uk......will have them next Tuesday id say - this thing is gonna sing I tell ya - thanks for everyones help....…

3-D printing with ABS filament is very cool, but does it come in the right color? Is resolution high enough to re-create the subtly texturing of the SE's Case? If I can find my mu…

The bridge rectifier is probably ok. Did you test it with the diode check on the DMM? If its ok then its safe to throw it back in, throw the filter caps back in and another fuse. I…

Unfortunately it's ultrasonically welded so I can't open it without destroying the case. My assumption is you will find the AAUI-AUI conversion is completely passsive, along with a…

yeah i always had good luck with 1.7 gig partitions.  seemed to get issues when i went over that.   

olePigeon said: How about Lido? Click to expand... I will start looking olePigeon... Thanks for the tip. jack

They have 3D printers at the school I work at. It's pretty cheap to print. For example, I printed a case for my iPhone, it cost $0.55. I'm not sure if there is a 3D scanner there,…

parts ordered

Thanks very much - I used Lido to format it in the first place, but my partitions are 2gb, I'll backup, initialise and then make smaller partitions and try again.

unity - been looking at the 614-0039   model and  614-0060 - cant see any difference....still don't know what to do - techknight - thanks for the info - appreciate it - but as us…

NJRoadfan said: Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, b…

How about Lido?

I don't know if they ever made one specifically, but there were adapters out there.  I think our own member bbraun has/makes an adapter to connect ADB to pre-ADB Macs.

Hi Folks.... Can anyone tell me the CFM and the dBA of the *original* Color Classic fan? The original fan is 80 mm X 80 mm by 25 mm.  I believe the fan housing can take at least …

Yeah, make sure your partitions are under 2GBs.  That can cause all sorts of weird problems.

Rats!  The patched HDSC Setup bootdisk is too large to fit on a 3.5 inch floppy.  I will keep looking. Thanks everyone jack

i would say hit it with lido7 ,  nuke drive make new partitions, don't exceed 1.7 gb each. re-install 7.5, and you should be fine. here

The next thing I'm going to try is a fresh system install on a different SD card