What sort of adaptor are you using? If you have an adaptor with DIP switches or a dial, you might want to adjust it to force the monitor to run at either 640x480 or 800x600.
OK. I would say you probably have no bot registrations and are looking at about 100% human spam registrations right now, most likely Chinese or Russians. The Mac question might hel…
I am pretty sure the display can display 800x600.
The display is made by a company that starts with N I can't remember right now.
I'll check later today and try resetting the PRA…
Hmm, sounds like an interesting solution. However, as I said above, we have had virtually no spam-bot registrations since adding the anti-spam questions to the registration form, t…
68kMLAPowerPCby Mike RichardsonWed, 8 Jul 2009 - 13:48
There is a (blue) wire soldered between the aluminium 'can' (looks like an oscillator - located by the power plug on the board) and the small square chip next to it.
The capacitor…
Perhaps its a very early production model, and there was a part shortage at the time this machine was built? Or perhaps it could be a *very* late prototype? Does the board differ t…
Hi all, just bought a(nother) SE/30 on ebay, so I can practise with my imminent capacitor replacement for my 'proper' SE/30 running A/UX. The monitor's a bit ghosty and there's no …
Hmm, sounds like an interesting solution. However, as I said above, we have had virtually no spam-bot registrations since adding the anti-spam questions to the registration form, t…
So it's just the individual files.
You need a Mac with an 800k drive, select single sided when you format the disks.
I have no idea how you "bless" the system file. The floppies …
What other resolutions does the LCD support? The Performa x2xx/x3xx internal video does not support 1024x768 - only 640x480, 800x600 and 832x624. If the display only supports 1024x…
Interesting - I thought that ALL PowerBooks use the keyboard as a part of the cooling system.
Click to expand...
The black covering on the pismo keyboard that melts when it get…
So I have a Classic II with 4 mb of RAM. I got it open (finally) removed the old memory and installed 2 4mb 30 pin SIMMs. I power up the Mac, go to "About This Macintosh" and it …
So I have a Classic II with 4 mb of RAM. I got it open (finally) removed the old memory and installed 2 4mb 30 pin SIMMs. I power up the Mac, go to "About This Macintosh" and it …
I finally have an M0001 original mac :beige: (no 128K badges) and I also have a copy of system 1.0 on my hard drive. I could probably figure out a way to make boot disks but I …
Also - will the machine be upset when I remove sys enabler 401 out while the system is runnig?
Click to expand...
The best thing to do would be to remove System Enabler 401, th…
Computers back then were designed for office use and not home use correct (TV interference wasn't a major concern).
Click to expand...
Not true, most MICRO-Computers were desig…
I doubt this applies but my powermac is a real pita about VGA too, if you start that machine up without a monitor plugged in it defaults to the tv out, which means you gotta hook i…