OK ... so I've given myself a little project ... After cannibalising two IIci's and today sending the better board off to Uniserver for a recap I'm thinking abo…
Advanced filters
Source
I did several searches and have not found any topics on this forum ...however I have to believe this is covered somewhere? I would like to connect two macs, a M…
It's insufferably slow! I have an SE running 7.1 - 800k FDD, 4MB RAM, SCSI2SD with a 256mb microSD, and an (Excelan/Kinetics/Shiva) Etherport SE. I also have ne…
HI ..I have a PB 5300c with a 3Com 3c589 card . was connecting ok until I had a major crash and had to reinstall os 7.5.3 on SSD card to boot . Boots Ok now fro…
Hi people. Got my hands on a laserwriter finally. Ended up getting an Apple Laserwriter 4/600 PS. I have it hooked up to my LC475. Printer is sitting there with…
I'm thinking of replacing the Ethernet card in my IIx with one that either 1) doesn't require drivers or 2) has drivers readily available. I've never gotten my …
Hello, I have a SE/30 that is running System 6.0.8, 7.1, and 7.5.5 on separate partitions. I have a good ethernet NIC card and 7.5.5, OTT 1.3, appropriate drive…
I've got a nice little Mac Performa 640CD DOS Compatible which gives me an Intel 486/66 that I can run DOS/Windows on. Everything is working well on both sides …
Just dug up my old SCSI to Ethernet Adapter and my floppy went bad. Not surprising. BUt I am hoping someone out there might have a copy of the driver/installer …
I recently acquired a lovely PowerBook 150. Great condition, and it's got 40MB of RAM -- I assume a previous owner had the upgrade done. I'd like to get this ma…
So I have a Quadra 650 that serves as a console to run some Virtual World 3.0 pods. I have no other copies of the console software or drivers for the custom A/R…
Was wondering if there were any USB dongles for old G3 ibooks to give you wireless G capability (WPA)?
My grandparents have a complete collection of world books dating from 1963 and 1996. Of course, the PC revolution took off in the 80s, so I thought it would be …
Hey guys So I have this problem, I have a G4 500Mhz Pismo, running 10.4.11. When ever I try connecting to the wifi at home it will report I have entered the wro…
I'm looking for drivers for an Asante LC PDS ethernet card, but I'm so new to the 68k scene (Hello!) that I don't know where to look. So far I've checked Google…
Does anyone have any idea why my Classic might throw a "Divide by zero" error?, when I try and connect to an iMac G3.Its the classic Mac bomb screen and even if…
Folks... I use a Farallon brand ethernet card in my Color Classic. So far, I have Netscape 3.0, but soon I hope to install another browser. I am connected to my…
I'm going mad trying to do this with limited resources. I am seriously going to lose it if I can't get this working. I need to install System 7.5 on my Quadra 6…
Hi all, First of all, apologies if this has come up before (it must have, but I couldn't find it). Last month I was able to purchase a recapped SE/30 from a guy…
Hi, Im trying to connect an iMac G3 with OS9 and a Classic with a Dayna SCSI / Ethernet breakout box. They are connected via a Netgear Prosafe GS105. The iMac h…
I am trying to create a LocalTalk to ethernet bridge (or something) with ethernet to my PM 7100 and localtalk to an SE. The end goal is to use the internet on t…
Hi folks... The analog board for my color classic came back after a recap, and I have re assembled my color classic. It appears to work just great. I am running…
Hi, I've got a Asanté EN/SC-10T from an old network stuff lot, but have problem making it work with a MacClassic. That is, I do as the Asanté setup guide says :…
Does anyone know where I can get these? Or are they not even needed? I'm running a SE/30 machine with System 7.5.5. To be perfectly honest I haven't tested yet.…
So, I have a nice working Macintosh IIci running System 7.5.4 (yes, I have a copy). I am thinking of getting a colour printer off eBay. However, I also have a M…