oh dear - acid spill - ah well - you might be fixing that for a long time. Have you tried to power it up? - any results based on what I have seen of these acid spills you have a…

The Y1 piezo was killed by the battery acid. Same with D1. Both are replaceable. I removed the battery holder.

I got given three Powerbook Duos today! On the downside, I tested the 2300 and the power adaptor popped and smoke came out..  The same happened with a different adaptor and a 280.…

There are radial caps, may want to change them for good measure.

Ok, so I have managed to find my way back into the apple collecting hobby accidentally. I have since aquired an Apple IIgs that when I turn it on, I get Fatal System Error 0911.…

I hate to tell you pal but your missing more than a pad on C12 there The Y1 crystal is missing along with D1 transistor. The battery holder is also gone............did you remove…

Take out all of the PCI cards you don't absolutely need. Reseat those that you keep. Reseat the RAM. Check all of the SCSI connections and keep connected only what you need. Make…

Hello, I installed the 604ev card processor in the 9600, removing the NewerTech g3/445 card, but was unable to boot. Tried to boot from the HD, and the 8.5 original CD I own. Tri…

This obviously isn't a 'new' topic.  My previous soldering iron (and I...) ruined the pads (on C12) here.  I'm looking for any advice specifically on that.  Then I have to recap it…

Wait, how rare is what? That's an Apple IIe, neither an ITT 2020 nor an "original" Apple ][. (Or "EuroPlus", for that matter.)

OK. How rare are they in the Netherlands? No so. I see one for around 40 dollar offered. A genuine with two disk drives. http://link.marktplaats.nl/m922304692

Gorgonops said: Obviously case is pretty clearly a different casting; in addition to the different keyboard opening(s)) details like the bezel trim and the braces that hold t…

Obviously case is pretty clearly a different casting; in addition to the different keyboard opening(s)) details like the bezel trim and the braces that hold the lid up are differen…

Is this a clone or an Apple kit sold by ITT like the B&H?

The 30? Yep... it's had a very hard life the poor thing. A recap should fix the electronic side of things but the case will be an interesting excercise to get fixed to an acceptabl…

OUCH!

And this is my haggard socketted SE/30... had it for about 13 years and definitiely a lot of work in getting this up to scratch again... As you can see from the pics it had a terri…

My mint SE Superdrive... bought 10 years ago at a recovery center shop for $20. My first Mac Plus, purchased at a school sale in the 7th grade, circa 2000. partial recap in …

And here are my pair of iMacs that were painstakingly rebuilt... Graphite is possibly up for round two surgery shortly due to some recurring issues. The build process was covered s…

So, I just decided to consolidate my various stuff and things into a single thread on another forum yesterday so figured I may as well do the same here. Some of the stuff here you …

A nice find again. An Apple ][ ITT 2020 OEM. A birthday present from my wife! The case seems to be OEM. To replace the original ITT grey one ( if have this one too......) Monito…

unity said: As for the one you just acquired, compare the serial on the front with the model number on the back with the regulatory label. They should match. If not then its …

Unity, my SE/30 is an M5119 manufactured in Fremont, not Singapore, in 1989. Socketed CPU as well.

Scott Baret said: For the Classic I, there were analog board differences (see the CRT thread). Some very early logic boards are slightly different, too. Click to expand...…

Ok. That may be the model difference then in the Classic. To add to all this confusion, I really could add the TRUE model numbers to some of these but it would get NUTS. The SE ha…