I was going to say, Elfen, if you can clue me in to any factors you think might affect the cards, I can test them systematically and make like a grid along with a correlation of th…

The adapters giving problems are all directly PCMCIA/Cardbus to SD.  I successfully set up my 16gb card - the one that had the weird OS 8.5 Disk Tools System Folder on it - with th…

This thread is about PRAM batteries. The native 3400/Kanga PRAM battery is NiMH, not li-ion.

Ah, well ... The native PB 3400c/Kanga battery is LiIon, not NiMH. AichEss

For the record, if anyone buys the PB 3400c/Kanga NiMH battery replacement, black is positive and red is negative: in addition to switching the connector you will need to reverse t…

Lets go back to the very beginning... You got... A CF in a PCMCIA adapter that crashed a 3400 and gives problems on a 5300? It gave  a Sad Mac on the 3400 and then bars on boot wh…

No strange sounds! Hope the glass is still OK!

Inside the Widget is a glass scale used for head position feedback.  The scale is attached with glue and 30 years later on many Widgets the glue has failed.  This  commonly results…

The floppy drive has been very well tested and works perfectly.  The disk also works perfectly. I was going to say the SCSI enclosure didn't work but it appears to be booting to O…

I think it might be because the disk isnt getting up to full RPM? I know the servo controllers of HDDs are smart enough if it senses a problem with spindle speed, the rest will han…

Yes. This is not going well. Sometimes the brake releases, but after that not much happens. I'm not sure if this disk will work ever. But I will try it on a Lisa one day. That wil…

On your video, I never hear the brake release. After the drive comes to speed - about 5 seconds or so, you should hear a "clunk" as the brake releases and then the drive should sta…

Hi,  I have some. Send me a P.M, if you still need one. Take Care,

Elfen said: I think you can turn the unit on as a SCSI Drive and connect it to another Mac through the SCSI Port and inspect the drive like modern Macs can connect by FireWir…

bigmessowires said: A commenter on my blog also pointed out this homebrew adapter based on an Altera DE0-Nano. It's got a very nicely detailed write-up of how it works. https…

Yes, I'd like one as well for my IIgs. Maybe if I got one, I'd actually use it! c

raoulduke said: It doesn't seem to be able to boot from floppy.  It starts to boot normally and then on the smiling mac it spits out the floppy and goes back to the flashing …

I really like that adapter.  If you decide to make any, BMOW, let me know.  I'd love to buy one or two.  Replacing an aging CRT with an LCD for my Apple IIs would be pretty handy. …

Gorgonops said: For authenticity (I guess) those scalers render the border area in their output, and what that ends up translating to is on, say, a 1280 pixel wide LCD displa…

I mentioned earlier in the thread that I've been using one of those "CGA to VGA" boards on my IIgs setup. (And I'm forced to be pedantic here: those boards *are not actually "CGA";…

Perhpaps its scaler is better, but my monitor won't accept 15 kHz RGB, so it can only use composite video. I'm guessing 15 kHz RGB converted to VGA with one of these CGA adapters w…

Is this better: youtu.be/CTNr0uAiWwk Or

Got a link? Embedded videos aren't working, apparently. c

Yes, that unit will work, but the quality is likely "eh", "meh", or non-existent. The GBS-8220 board that likely came out of the same factory in China is commonly found for $30 or …

On the topic of IIgs RGB video output - does anyone know if it's the same as CGA video, found on old PC graphics cards? CGA is also described as a 15 kHz video signal with analog R…