PM9600/200MP startup chime but no video or activity?? — #4
Is the cable good? No bent pins?
Found 9,938 posts across 1 forum.
PM9600/200MP startup chime but no video or activity?? — #3
Can't even get to the point of being able to boot unfortunately... It powers up the screen just after the startup chime without displaying anything then just drops it back to power…
PM9600/200MP startup chime but no video or activity?? — #2
You try reinstalling the OS, or swapping with a drive with a known-good OS?
First time boot for incomplete Lisa XL — #3
On a regular Lisa, I'd remove the top, and there are 4-5 pots along the top of the analog circuit board that adjust horizontal and vertical hold, screen height and width, etc.
The…
OS 8.5 freezes while loading on a 9600 — #2
The issue is the processor upgrade. You need an older cpu to do the install, then install software (usually an init and a control panel) for the processor and then you will be goo…
First time boot for incomplete Lisa XL — #2
For our mobile (iPhone, iPad, etc) user the video in the post. Won't be visible on normal web browser.
http://www.youtube.com/watch?v=rvsUVku9fFU
PPC Powerbook PRAM Battery Sources — #8
This thread is about PRAM batteries. The native 3400/Kanga PRAM battery is NiMH, not li-ion.
PPC Powerbook PRAM Battery Sources — #7
Ah, well ...
The native PB 3400c/Kanga battery is LiIon, not NiMH.
AichEss
PPC Powerbook PRAM Battery Sources — #6
For the record, if anyone buys the PB 3400c/Kanga NiMH battery replacement, black is positive and red is negative: in addition to switching the connector you will need to reverse t…
Widget drive — #44
No strange sounds! Hope the glass is still OK!
Widget drive — #43
Inside the Widget is a glass scale used for head position feedback. The scale is attached with glue and 30 years later on many Widgets the glue has failed. This commonly results…
Widget drive — #42
I think it might be because the disk isnt getting up to full RPM? I know the servo controllers of HDDs are smart enough if it senses a problem with spindle speed, the rest will han…
Widget drive — #41
Yes. This is not going well. Sometimes the brake releases, but after that not much happens.
I'm not sure if this disk will work ever. But I will try it on a Lisa one day. That wil…
Widget drive — #40
On your video, I never hear the brake release. After the drive comes to speed - about 5 seconds or so, you should hear a "clunk" as the brake releases and then the drive should sta…
Looking for RGB cable for Apple IIgs — #3
Hi,
I have some. Send me a P.M, if you still need one.
Take Care,
Widget drive — #39
Is this better:
youtu.be/CTNr0uAiWwk
Or
Widget drive — #38
Got a link? Embedded videos aren't working, apparently.
c
Widget drive — #37
OK. Here is a movie from still to running.
Widget drive — #36
No. the wind up of the drive. You did a video on the drive already running.
would like to see one from non-powered, to powered up and spinning.
Widget drive — #35
@techknight
Do you mean a kind of roundup?
Widget drive — #34
Would like to see the "wind up" from a dead stop.
What is under the hood? — #3
Anyone on this? Could I test the analog board and monitor with a Mac motherboard? Or else?
Widget drive — #33
Awesome! Spin spin spin!
Widget drive — #32
OK. Started for a second and third time. Now it is running for an hour. I will let it run until I go to sleep.
I should fix the power a bit. Use some ductape( yes techknight...goo…
Widget drive — #31
If you get it going again, let it run for a while, especially in different orientations.
Apocryphal tales say that ProFile drives that screech like a banshee "get better" after ru…