Hi... I would like to pull the analog board in my Color Classic.  Any one know of a web site (that is not dead) that has good photos of this?  I have the Mac Service manual, but t…

The positive pad goes to the inductor next to it:

interesting. what kind of sreensavers ? known ones like After Dark  ?

I have been given this CD, probably included with a monitor. Tons of pictures and screen savers.

here is the capacitor i need the information for, thanks to all.

Hey guys im wondering what you think about this board, im guessing its a II+? http://www.ebay.com/itm/Original-1979-Apple-II-Motherboard-/351403760285?pt=LH_DefaultDomain_0&a…

Can somebody advise where the + side of the C8 capacitor is connected on a CC LB ? The pad is really bad and i will like to run a clean wire.

The 575 was always the pick of the crop for me... Has the nice Sony screen still but has the '040 in it so still quite usable. As a series though, the 5xx are still probably among …

I still would like to get one of these. I have the TV and I finally found an LC580 but the screen just isn't the same on the 580.

I like the case a lot.

Nice! I know some dont care for these. But one of em it near the top of my list.

Just added this to my collection Macintosh LC 520     The 68030 is too slow to play Doom but it does run Master of Orion well enough.    

You try another known good working drive? I would hope so.  Otherwise, did you check the DMA lines that bounce between the SCSI IC, GLU, and VIA? 

I checked all traces going to/coming from the SCSI IC, they are fine.

Time to check traces between the SCSI IC and the SCSI header. They break at the IC. 

The voltages above were the ones coming from the pwr supply. With the RAM they are -5V (6), -11.77V (7), +5.04V (12,13), +12.71V (14) Molex are 12.33V and 5.05V RAM was maybe ju…

so -12 is too low and +12 is two high,  and what are they without the ram?

ATX connector measured voltages are -4.98V (6), -10.47V (7), +5.28V (12,13), +12.62V (14) Molex disk connector voltages are 12.71V and 5.08V

With symptoms like that how is voltage?

This one is a little bigger and you kinda have to squeeze it in the holding area but you can get it in there... at least with this you can replace the battery's when need be... Thi…

Not a bad idea. I'm still using the original pack on mine but I'm sure it will die one day.

Ok so I found a great solution to replace the battery..... Purchase these http://www.ebay.com/itm/180979418921?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT …

Awesome man , Did you get MLCC's on there or stock Panasonic electrolytics? I forgot. I'm sure blob would be happy! I think he just turned 71

Alright. I'm going to order up a set then, it should really help when this thing decides to give me trouble in the future.

just got my boards back, yup the Classic II is the 4 Rom version.