I guess every machine is different. Since the addition of the 3rd drive, it's been noticeably warmer in my room which is nice because the heating for the house isn't so great u…

I am about to replace my old leaky caps on my IIci but before I go ahead and order them from Trag I wanted to see if anyone knew whether or not mylar capacitors might be an option …

I wondered where that MacDraw auction had gone... You didn't buy from seller jmorand did you?

You are so lucky I didn't see that auction. I would have bid $25 on it.

A good piece of software if you're running on a modern Mac is Reason. Has enough features to create tracks without any MIDI input, but if you're wanting to do serious keyboard sess…

A broad (1"+) wood chisel can be used to pry the processor out of the socket, working slowly one side at a time. You don't hit it, you turn it like you might a screwdriver, and you…

Then the only change was that holes were drilled in the case. I had assumed that the case without holes in the side must have had a speaker grill elsewhere, and so that the speaker…

I'm finally getting around to swapping the 68LC040 in my Q605 for a full 68040. I have a 68040 donor machine ready to go, put I have no experience pulling chips. Any advice on wher…

I just won two separate Claris auctions on eBay. One had MacDraw II but also looked to have some sort of Claris clip art collection bundled with it. The other was MacWrite II. Both…

My Classic two has the speaker grille but the speaker as far as I know has not moved in either iteration of Classic II!

Hey that's pretty cool. I tried doing something like that with my Mac Classic II, I got the internet set up with it fine, but I couldn't find a stable browser for Mac OS 7.5.5 .…

There were indeed two different Classic II cases, the difference between them being the speaker location. Whether there was a corresponding change in the logic board configuration …

There were indeed two different Classic II cases, the difference between them being the speaker location. Whether there was a corresponding change in the logic board configuration …

Both built in Singapore, and both boards indicate they were assembled there too. Pina's book lists the part numbers for the 4 chip ROM board only which is odd as it's dated 1993 w…

There were indeed two different Classic II cases, the difference between them being the speaker location. Whether there was a corresponding change in the logic board configuration …

Where did the speakers get relocated to? Click to expand... They didn't. I don't know what he's talking about. I have heard that the CLassic II had two different ROM configs, …

Is the change perhaps associated with when the speaker was moved? That would be easier to pin down to a specific date. Click to expand... In these two, the speakers are located…

Ok i ordered a 8-pin cable male to male. Another question. Is it possible to connect the roland mt-32 to imac g3 with a usb midi cable (for mac 9)?

Is the change perhaps associated with when the speaker was moved? That would be easier to pin down to a specific date.

current status: IBM PC-DOS 2000 + pcmcia + PC card 16 (network everywhere) 100 base T lan + linksys 802.11G to 100 baseT wifi bridge + graphical web browser http://cheesefactory.…

You are certain that this card is compatible with OS 9, and doesn't require special drivers? Click to expand... Not really sure. I started off this question noting …

I use tape all the time for the vintage gear (archives).

After looking through all the topics in this forum, I don't see that this has come up before; my apologies if it has. I have two logic boards, both marked as Classic II and dated …

You are certain that this card is compatible with OS 9, and doesn't require special drivers?

The DB25 connector on the old Macs IS NOT a serial port! It is a SCSI port, and connecting a non-SCSI cable/device could potentially damage the system. The 8-pin round ports are th…