Thread
i did it $50 key lime ibook
I looked in side it has a ram upgrade but no airport card.
the keyboard is 100%
I should be able to power it up in the morning.
what is the best way to get around the password issues
i do not want to format the hd? until i look it over
reinstall a clean os? 9 or 10?
i guess i could boot up with tech tools
the keyboard is 100%
I should be able to power it up in the morning.
what is the best way to get around the password issues
i do not want to format the hd? until i look it over
reinstall a clean os? 9 or 10?
i guess i could boot up with tech tools
If it's running OS X, then see this page:can you give a brief or point me to a description of reseting the computer login and password
http://support.apple.com/kb/HT1274
You need to have an OS X CD (it shouldn't matter which version, but the same version that is on the machine would be best). If you don't, there's a way to do it through single user mode... but I can't find the article off hand.
lattest update:
i took it down and the input board was fried. i also inspected the mobo
the are small areas of white corrosion like where the input board plug solders to the mobo. and around some power components large caps mainly.
would you try to clean the mobo of the corrosion with some contact cleaner and go back with it?
I am afraid that the mobo is shorted out the input board will fry again.
i took it down and the input board was fried. i also inspected the mobo
the are small areas of white corrosion like where the input board plug solders to the mobo. and around some power components large caps mainly.
would you try to clean the mobo of the corrosion with some contact cleaner and go back with it?
I am afraid that the mobo is shorted out the input board will fry again.
Logic boards for an iBook Clamshell let alone with firewire costs a lot of money. I just happen to join the LEM swap list at the right time to find a logic board for my clamshell.lattest update:
i took it down and the input board was fried. i also inspected the mobo
the are small areas of white corrosion like where the input board plug solders to the mobo. and around some power components large caps mainly.
would you try to clean the mobo of the corrosion with some contact cleaner and go back with it?
I am afraid that the mobo is shorted out the input board will fry again.
well i tried the dc input module no luck it appears to be the mobo this sucks.
i have no way to test components. I think the power stuff got fried.
i need a ibook with a bad case no hd etc. I haven't given up yet
nurse get me the paddles looks like a heart transplant
i have no way to test components. I think the power stuff got fried.
i need a ibook with a bad case no hd etc. I haven't given up yet
nurse get me the paddles looks like a heart transplant
it looks like the clamshell is coming off life support
my lime clamy has 192 meg of ram and 10.3.3 installed
no dead pixels
it cost me for a mobo
i think is needs more ram and an air port card would be nice.
oh yes a new battery
i reset the passwords thanks for the help
if only it cost $50
my lime clamy has 192 meg of ram and 10.3.3 installed
no dead pixels
it cost me for a mobo
i think is needs more ram and an air port card would be nice.
oh yes a new battery
i reset the passwords thanks for the help
if only it cost $50
i just had to do it on a snow ibook, just goto http://hackaddict.blogspot.com/2007/07/reset-os-x-password-without-os-x-cd.html