The hdd in my Classic died a few weeks ago. I've been so busy with other projects that I just haven't had the time to open it up and swap the drive. Last night …
Advanced filters
Source
While shedding some tears over the loss of such a tremendous amount of data on this site, I have decided to do all I can do to restore what's left of it via Goo…
Hi all! I have a PowerBook 145 that's been running 24/7 for the last year or so, serving pommel-s.ch, a website about my collection (down at the moment, obvious…
Installed a SuperMac Spectrum/24 PDQ+ video card into the IIci. Feels like I'm using a Mac SE, video-wise. Control Panel is the SuperVideo 3.1. OS is 7.5.5... D…
i just got this in the mail today, this is my first LC-III maybe these mods are normal?
So I have a fairly beefed up 950 (80mhz PPC and 192mb ram) I'm contemplating upgrading from my Radius VideoVision (which does not work with the PowerPC mode on …
So, now its time to open the thread for this project. For those of us that are less-fortunate to have a working SCSI HDD, and for those who DO have them and are…
As title just a quick question... Will the AC adapter designed for the PowerBook 100 work/fit on the 145b?
Is it possible to use this graphic card for a second monitor in System 7.6? For a dual monitor setup... The sources I've found state that it supports System 7.0…
I have one that has not been plugged in since 1992. I plugged it into my Mac Plus the other day and when I hit the power switch I heard a faint pop from inside …
Does the screen on a G4 iMac go around and around enough to wind up the lcd wiring? This would presumably cause problems - and I am having problems with a 15" u…
I have collected another Imac Bondie. The first try just gave me a spinning fan and amber light, removed the logic board and ram...exchange the ram stick and ge…
Was down in Seattle yesterday to meet up with another member who had offered me a ProFile for my projects (THANK YOU!!). While down there he was also nice enoug…
Anyone know if the original, non-backlit Mac Portable has a fuse on the motherboard? I've seen references to one, but don't know if they might have involved the…
So I kinda want a stand alone Powermac to serve delicious oldskool apps to my 7100 when it's all said and done. I found these guys at a hacker studio I frequent…
Today I was at my moms helping her with her newer iMac. When I went searching for screen cleaner in her desk, I saw an older iPod video. I asked her what was wr…
I just picked up a Macintosh TV. It doesn't power on. When I plug it in and turn on the mains in the back, I hear a short buzz/chirp. It doesn't turn on by pres…
I successfully upgraded my iMac G3/350 to an iMac G3/600. It used to have 9.2.1 on a 6 GB HDD. Now, it's Jaguar with 9.2.(2?) for classic. The supplies (mobo, m…
Hi, it's me again! I finally got round to recapping my Performa 475. My soldering skils are not the best, but I managed to do it without damaging anything . How…
Hello, I scored a 400Mhz sawtooth and don't know too much about this machine. it has OSX 10.2 installed. I have found CPU upgrades that will take it up to 1.6 G…
I have a Radius PrecisionColor Pro 24XP NuBus video card. It won't do any resolution bigger than 832x624 at any color depth, even though it can do 832x624 @ 24B…
I have been playing around with a nice dual 800mhz G4 that was abandoned for what I believe were GPU issues. I managed to swap the video card and everything wor…
Ok, this is not hardware/software, but hey, it's an nice one i think Got this today, once been given by Apple as a gift (might be only one in Finland). It's mad…
I've been running the Basilisk II Macintosh emulator for a while now. It seems, however, to return an error message from time to time. If I set the emulated mac…
I recently got a performa 6116cd for my collection to replace my dead 6100/66 powermac. The board is dead on the 6100 but i did salvage the dos compatibility ca…