Thanks Elfen!  Next week I'll have an exam break at university, so I hope I'll have a couple of days to give this little boy some care. Seems like a reasonably easy fix, at least …

gobabushka said: Ok, so I have managed to find my way back into the apple collecting hobby accidentally. I have since aquired an Apple IIgs that when I turn it on, I get F…

This is probably an international analog board, the capacitor references will be different...

It's possible, they dont look like they have leaked, but it couldnt hurt, any other ideas?

There was no result of the initial powerup, but C12, Y1 and D1 were all missing.  The analog board seems to be fine, and (if I'm not misremembering), there was power to both the fl…

128K, 512K, Pluses and SE's rarely need a logic board recap. But they do need work on the analog board. Check for cracked solder connections on harness connectors to the logic boar…

Its salvageable. The 190 needs to be taken apart and and cleaned out first. The case where corrosion is found can be cleaned with  baking soda rub down and rinsed out with water an…

They usually dont. But they are at the age of bad caps so anything is possible

I guess I'm very lucky. The mainboard of my new Plus looks phenomenal. Just a bit of dust. It has 4 MB installed. The caps on the mainboard are of normal axial type: 5x 33uF, 16 V…

Ok, thanks. I still would like to have a complete list of all caps (analogue and digital board) for reference. So far I found one for the analogue board: http://www.jagshouse.com/…

I soldered the connectors on the analog board with some new solder and the flickering stopped. Maybe it will do the trick with your Plus too.

Is there a list of capacitors for replacement available? I searched here and in the web but did not find one. TIA, bobo68

Probably something loose on the analog board.

oh dear - acid spill - ah well - you might be fixing that for a long time. Have you tried to power it up? - any results based on what I have seen of these acid spills you have a…

The Y1 piezo was killed by the battery acid. Same with D1. Both are replaceable. I removed the battery holder.

There are radial caps, may want to change them for good measure.

I hate to tell you pal but your missing more than a pad on C12 there The Y1 crystal is missing along with D1 transistor. The battery holder is also gone............did you remove…

Take out all of the PCI cards you don't absolutely need. Reseat those that you keep. Reseat the RAM. Check all of the SCSI connections and keep connected only what you need. Make…

Hello, I installed the 604ev card processor in the 9600, removing the NewerTech g3/445 card, but was unable to boot. Tried to boot from the HD, and the 8.5 original CD I own. Tri…

Wait, how rare is what? That's an Apple IIe, neither an ITT 2020 nor an "original" Apple ][. (Or "EuroPlus", for that matter.)

OK. How rare are they in the Netherlands? No so. I see one for around 40 dollar offered. A genuine with two disk drives. http://link.marktplaats.nl/m922304692

Gorgonops said: Obviously case is pretty clearly a different casting; in addition to the different keyboard opening(s)) details like the bezel trim and the braces that hold t…

Obviously case is pretty clearly a different casting; in addition to the different keyboard opening(s)) details like the bezel trim and the braces that hold the lid up are differen…

Is this a clone or an Apple kit sold by ITT like the B&H?

The 30? Yep... it's had a very hard life the poor thing. A recap should fix the electronic side of things but the case will be an interesting excercise to get fixed to an acceptabl…