Sounds like you shouldn't fire them up again until one of our resident flyback gurus passes judgment! :-/

Looks very good, have you got "before" piccies? Which part do you need to mitre? :?:

Someone gave me 2 of these machines that he had in his attic since about 2001. they came from a local school district and has all the school programs on them. Well, i fired one of…

Now, the next challenge is to free some time to play with my collection. I haven't touched it in weeks… :-/ Click to expand... What about Christmas time (etc.. right now!!! …

looks pretty good

I still need to mitre the edge so it'll fit nicely, but so far I think it's turned out great. Took me about 2 hours to dremel the whole thing. { "lightbox_close": "Clo…

Hello, what is the easiest way to transfer files between a LC 475 (7.5.3) and a MacBook Pro (10.6.2)?

I burned this ISO under Windows and ImgBurn and it works like a charm... Snow Leopard makes unreadable CDs with this ISO. I tested it with the same CD-Rs.

If you have a dock with a SCSI port, and a PowerBook "SCSI disk adaptor", and a USB-to-SCSI adaptor, then yes. Just follow the directions on the LEM link, "SCSI Disk Mode" section…

Heck yeah, why not? Have a good look at some of the iMac and ATX-cased Mac hacks around the web. Do you have the original eMac power supply? That will save a lot of hassle.

There is one particular midi/audio sequencer that Emagic and Roland developed to edit the Roland VS series of hard disk recorder. / The Emagic programme Logic could be used to cont…

In that case, the only other variable is the fact that the G3/500 is a copper one, though I don't remember if that introduced any performance enhancements, per se. Based on what I…

I have a duo 210 that won't boot, and I seem to have lost the floppy drive for it. I want to get access to it so I can fix my finder and system files (played around with them in re…

Hi! I'm pretty much new to the Newton world, since my latest conquest involved a MP 120 and a MP 2000 upgraded to 2100. Those are my first Newton. The 120 is in german. I don't h…

Great week in conquests for yours truly: - two Newton: a MP 120 and a MP 2000 upgraded to 2100. Both work perfectly! The 120 lacks its stylus and is in German. I live in Switzerla…

Yeah, that was my thought at first, but there aren't any caps right near where the apparent leakage is. And the closest one looks just fine. Also, I would have thought that leaky…

I went ahead and downloaded the XLR8 firmware block remover. I assume it also works for non-XLR8 G4's. The G3/500 is a Buffalo (Melco) HG3-G3500 with 1mb cache running at 250mhz…

I went ahead and downloaded the XLR8 firmware block remover. I assume it also works for non-XLR8 G4's. The G3/500 is a Buffalo (Melco) HG3-G3500 with 1mb cache running at 250mh…

Most of the "legit" Apple G3 modules have 1MB of L2 cache, which depending on the configuration of the /350 or /400 G4 chip, may actually cause the G3 to blow the G4 away in those …

I have an older MIDI enabled keyboard + I was thinking of getting a newer 1 or 2 octave controller. Most of those are USB but I think there are a couple that have raw MIDI as well.

I'd say it could be the caps, they seem to be reaching EOL on a lot of machines of this era (I have 2 LCII boards and 1 LC475 board, all from 1993 vintage machines that need recapp…

I have a third party MIDI interface...neat to have, but ultimately useless unless you're planning to connect musical instruments to your Mac.

So I'm starting to go through my collection to decide what to keep, and what to dump, er, pawn off, er, offer to the MLA members... The first two are a IIvx (that I have never eve…

I have a G4/400-ed B&W, which was a straight swap over from a 400Mhz G3 module. Since the only thing that changed in the swap was the module I suppose that's as good as exp…

Looking for some advice... I have a B&W G3. It originally a 400mhz system, but a few weeks ago, I upgraded it to a G3/500 with a cheap ZIF from IC-China. It is currently r…