Originally had a similar issue to the person on this thread http://68kmla.org/forums/viewtopic.php?f=6&t=16291 however my issue was resolved when removi…
Advanced filters
Source
So my Power Mac 7600 has a 300MHz Newertech Maxpowr G3 card installed. Problem is....I can't find an owner's manual online anywhere to set the DIP switch settin…
Ok, so I bought the iMac knowing that the ethernet port wasn't working. I looked at the pins and all of them are fine. I've already reset the PMU and the NVRAM …
Hi, I've been looking for on Farnell, Digikey, Mouser, Google, Ebay,... you name it for a 620uf 400v snap-in capacitor ( D=40mm, H=42mm ). It's in the Sony PSU …
Anyone ever see one of these? They were apparently made only for the French market, and combined a 9600 modem with telephony and fax functionality.
This will be my last question for awhile, I promise. Ok so I decided to revert my quadra to 7.6.1. The installation was a success, but the computer fails to boo…
Hey all, You may have seen these, but so far, there are two auctions for bulk lots of G3 iMacs in several colours (no Dalmations or Flower Powers that I can see…
Does an Apple Multiport Server NuBus card have a practical modern use? Could it be used to change a LocalTalk network into a star topology?
Did you see that post over at TUAW? I find it pretty impressive and really cool that a ][ is still in regular use to drive that industrial machine...
I picked up a Sonnet Presto for my LCIII+ recently for a damned good price, been looking for one for a couple of years, so was stoked to get it! Only problem is…
there must be a tool to do this - to read/write to disks and give you information on how it does?
Hi there! I had my SE/30 working, then reformatted the drive and now I can't get anything to work again :disapprove: I am using Silverlining 5.8.3 to partition …
In one of my earlier conquests, I received a couple of Apple IIes, one with a bunch of cards. I have been trying to gather info on some of these, but I still ne…
Hey all, new user here. Always been a PC guy, but these old Macs certainly have their charm. I recently rescued a 512k from a guy who was going to turn it into …
{ "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be loaded. Please try aga…
Seems my thread titles are only getting weirder. This machine is a resurrected old portable powerhouse with a massive windshield and chrome accents. It was in a…
Ok so i have decided to install 7.6.1 on my quadra 610. Since I don't have any cd caddies yet, I was forced to use the 19 =P floppy install. It was working grea…
My box of 128MB MO disks from Verbatim came with a Control Panel called "MO DISK MASTER." I like it because it'll mount any of my MO drives regardless of brand …
So my replacement hard drive is arriving in a few hours and I wanted to know if there is a specific way to replace it with the defective one in my Quadra 610. O…
Another recycling job, mint condition, 400Mhz/128MB but wouldn't boot. Took it home, disabled the very dead PRAM battery and now it's purring away happily on 9.…
I forgot about a non-working PowerBook 180c that I had, so I took the HDD out of it. I got a Y adapter cable for the power. I was afraid it wouldn't work, but I…
Are the CPU cards for all these Macs universally interchangeable? Are there exceptions?
Hi all, When I first got my Mac Plus, it had no video at all. The video came back after I hit it vigorously on the left hand side. Since then it has got more an…
I acquired another Powerbook G4, 1.67, 17 inch laptop (I have three now!) but this one doesn't seem to want to boot. I have tried a few things to get it booting…
Ok so my quadra 610 has been acting up a little the past few days. I managed to perform a complete install of OS 7.6.1. The problem is that my compute only mana…