Was given it as non functional. So far seems to work fine except when an external monitor is connected. Then it has video issues. Not sure what I'm going to do …
Advanced filters
Source
I have a G3 iMac (I think it is 400 MHz). I was wondering if there are any IRDA adaptors that exist that are compatible with OS9. I can use USB or ADB (I have t…
Hi, just finished recapping my IIci with tantalums. Works nicely. You can see it getting a fresh System 7.5.5. :ii: The machine came with a rare video card I gu…
I got a Duo 230 in unknown state. When I powered it on, it worked, but it was unstable. I then examined the capacitors on the board and found that every one of …
Anyone know of a working source for System 3.2? It turns out what I have is actually System 3.3. I need regular System 3.2, and not the 3.2 HD20 startup disk. I…
Hi folks, I finally found a 128K here in Toronto. But the A/B is dead. As I have a spare board (known to be in very good condition) that I took with me from Chi…
Today I received a Color Classic and an Apple Techstep Diagnostic Tool! Only had time to tinker with them for a little while. The color classic only makes a sli…
I was surfing the web earlier this morning when I happened to find this. Now there's some *serious* hacking involved! A few things he's done: 1) He's got an ARM…
I have a 3400c that had some corrosion beneath the PRAM battery. It wasn't actually that bad, and I've cleaned the board with still unknown results. Hopefully t…
G'day, I've got a 5500/250 cranking and fed it upto 9.2.2 using third party installer. Specs at everymac say that big Bertha's capable of 1024x768 in 16bit. I c…
I just got my floppy emu and I got my HD20 emulation working, but I am wondering if it will work on an un-expanded Macintosh 128K? I read somewhere that the Mac…
I have been wanting a cube for a while now, and I finally found a lot of two with accessories on eBay for $200 shipped. I planned to keep two, but only kept one…
I have this LC I motherboard I want to sell, but I also have an LC II motherboard that needs a VRAM SIMM. Can I switch the one with the LC I to the LC II? For t…
My apologies - this is a really old topic with tons of suggestions and tools available via a web search - almost too much - but I'm not having much luck and may…
Hello All, Great site! I signed up to this forum about a week ago, and I've spent some time going through the previous posts. Although there is a wealth of info…
So, I just booted up my clapped out and flakey Dual 2.0 G5 which works sometimes when it feels like it, and it is for the moment, running without a glitch... I …
Greetings, i installed system 7.1 in my powerbook 540c and i want to enable 24 bit addressing mode in order to run an old game (Rex Nebular). Although there is …
I'm having trouble getting my TransWarp card working. It passes its internal system check, but it keeps crashing when I try to play Ultima V with it. I've done …
I'm trying to get onto my school's network. It uses some type of Cisco redirect page. The FAQ notes possible SSL and SSH issues but both Classilla and MacSSH ha…
I just had my iici motherboard recapped and it looks beautiful! The problem is, I can't get it to display anything. I have bank A full of Ram. I am using a db15…
Hello. I recently purchased a Mac LC III, and before I reinstalled the system using the original system disks (7.0.1), I noticed that there was a utility in the…
Argggg….Due to the fans starting really soon after boot, wanted to change the thermal paste, so disassembled it. Was very difficult to remove the board. It was …
I recently dug my old Mac Plus out of the closet, and was hoping to copy the data off the hard drive in order to use it with a mac plus emulator on the PC (Vmac…
http://www.audioease.com/Pages/Legacy/dont forget about this (perhaps a sticky is applicable for this info?)Quote 2001-2008VST WrapperMark Of The Unicorn's Digi…
Hello everyone, I setup my IIGS (ROM 1 with an accelerator, SCSI, and RAM card) last night along with my PowerBook G3 (Mac OS 8.6). I was able to make a floppy …